CFCC 2018-2019 Catalog & Student Handbook [ARCHIVED CATALOG]
Course Descriptions
|
|
|
Please Note:
Prerequisites: A course taken prior to another course.
- CFCC administers one placement test: NCDAP. Satisfactory scores on placement tests taken at other colleges (SAT, ACT, COMPASS) may be used to waive Reading, Writing and Mathematical prerequisites. See the Placement Test Advising Guide, for additional information or talk with a counselor.
- Receipt of transfer credit for ENG 111 or above will waive the Reading and/or Writing prerequisites for certain courses.
- Receipt of a curriculum math credit will waive the prerequisites for certain courses.
Corequisites: A course taken at the same time as another course or prior to the course to be taken.
Some courses in communications, humanities/fine arts, mathematics, natural science, or social/behavioral science may fulfill a general education requirement in one of the following programs: AA (Associate in Arts), AS (Associate in Science), AFA (Associate in Fine Arts), AGE (Associate in General Education), AAS (Associate in Applied Science), DIP (Diploma), or CER (Certificate). Please refer to the programs of study section of this catalog for courses that satisfy each program’s general education requirements.
Developmental Math: Effective 2014 Fall, as mandated by the System Office, developmental math has been broken up into eight modules agreed upon and approved by the state. Students who have taken previous developmental math courses should refer to this table to equate current developmental math courses.
MAT 060 = DMA 10 , DMA 20 , DMA 30
MAT 070 = MSC 210 , DMA 50
MAT 080 = DMA 60 , DMA 70 , DMA 80
Developmental English and Reading: Students who have taken previous developmental English and Reading courses should refer to this table to equate current developmental English and Reading courses.
ENG 075 = DRE 96
ENG 085 = DRE 97
ENG 095 = DRE 98
|
| |
Work Based Learning |
| |
-
WBL 112BB - Work-Based Learning I
Class: 0 Lab: 0 Clinical: 0 Work: 10 Credits: 1
Prerequisites: Take WBL-112AB
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (L26865)
|
| |
-
WBL 112H - Work-Based Learning I HRM
Class: 0 Lab: 0 Clinical: 0 Work: 20 Credits: 2
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (L26336)
|
| |
-
WBL 112K - Work-Based Learning I CUL
Class: 0 Lab: 0 Clinical: 0 Work: 20 Credits: 2
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (L26337)
|
| |
-
WBL 112Y - Work-Based Learning I
Class: 0 Lab: 0 Clinical: 0 Work: 20 Credits: 2
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (L26194)
|
| |
-
WBL 112Z - Work-Based Learning I VET
Class: 0 Lab: 0 Clinical: 0 Work: 20 Credits: 2
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (L26780)
|
| |
-
WBL 113 - Work-Based Learning I
Class: 0 Lab: 0 Clinical: 30 Credits: 3
Prerequisites: None
Corequisites: None
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (S23797)
|
| |
-
WBL 115 - Work-Based Learning Seminar I
Class: 1 Lab: 0 Clinical: 0 Credits: 1
Corequisites: Take One: WBL-111, WBL-112, WBL-113 or WBL-114
This course description may be written by the individual colleges. This course is designed to be a corequisite seminar to accompany Work-Based Learning 111. Topics include: examination and analysis of the organizational structure, career path, job descriptions, job breakdowns and management style. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (S23799)
|
| |
-
WBL 115H - Work-Based Learning Seminar I
Class: 1 Lab: 0 Clinical: 0 Credits: 1
Corequisites: Take One: WBL-111, WBL-112, WBL-113 or WBL-114
This course description may be written by the individual colleges. Work-Based Learning Seminar I- Hotel & Restaurant (L26133)
|
| |
|
| |
-
WBL 115J - Work-Based Learning Seminar I
Class: 1 Lab: 0 Clinical: 0 Credits: 1
Corequisites: Take One: WBL-111, WBL-112, WBL-113 or WBL-114
This course description may be written by the individual colleges. (L26134)
|
| |
-
WBL 115K - Work-Based Learning Seminar I
Class: 1 Lab: 0 Clinical: 0 Credits: 1
Corequisites: Take One: WBL-111, WBL-112, WBL-113 or WBL-114
This course description may be written by the individual colleges. (L26136)
|
| |
-
WBL 115P - Work-Based Learning Seminar I
Class: 1 Lab: 0 Clinical: 0 Credits: 1
Corequisites: Take One: WBL-111, WBL-112, WBL-113 or WBL-114
This course description may be written by the individual colleges. (L26138)
|
| |
-
WBL 115U - Work-Based Learning Seminar I
Class: 1 Lab: 0 Clinical: 0 Credits: 1
Corequisites: Take One: WBL-111, WBL-112, WBL-113 or WBL-114
This course description may be written by the individual colleges. This course is designed to be a corequisite seminar to accompany Work-Based Learning 111. Topics include: examination and analysis of the organizational structure, career path, job descriptions, job breakdowns and management style. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (L26830)
|
| |
-
WBL 115V - Work-Based Learning Seminar I
Class: 1 Lab: 0 Clinical: 0 Credits: 1
Corequisites: Take One: WBL-111, WBL-112, WBL-113 or WBL-114
This course description may be written by the individual colleges. (L26137)
|
| |
-
WBL 115Y - Work-Based Learning Seminar I
Class: 1 Lab: 0 Clinical: 0 Credits: 1
Corequisites: Take One: WBL-111, WBL-112, WBL-113 or WBL-114
This course description may be written by the individual colleges. Work-Based Learning Seminar I- Baking and Pastry (L26132)
|
| |
-
WBL 121 - Work-Based Learning II
Class: 0 Lab: 0 Clinical: 0 Work: 10 Credits: 1
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (S23800)
|
| |
-
WBL 121A - Work-Based Learning II Acct
Class: 0 Lab: 0 Clinical: 0 Work: 10 Credits: 1
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (L25577)
|
| |
-
WBL 121B - Work-Based Learning II Bus.
Class: 0 Lab: 0 Clinical: 0 Work: 10 Credits: 1
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (L25580)
|
| |
-
WBL 121E - Work-Based Learning II Cet
Class: 0 Lab: 0 Clinical: 0 Work: 10 Credits: 1
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (L25596)
|
| |
-
WBL 121G - Work-Based Learning II Lnd-Gar
Class: 0 Lab: 0 Clinical: 0 Work: 10 Credits: 1
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (L25570)
|
| |
-
WBL 121H - Work-Based Learning II Hotel/R
Class: 0 Lab: 0 Clinical: 0 Work: 10 Credits: 1
Prerequisites: Take WBL-125
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (L25588)
|
| |
-
WBL 121K - Work-Based Learning II Culinar
Class: 0 Lab: 0 Clinical: 0 Work: 10 Credits: 1
Prerequisites: Take WBL-125
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (L25585)
|
| |
-
WBL 121N - Work-Based Learning II Nuc Tec
Class: 0 Lab: 0 Clinical: 0 Work: 10 Credits: 1
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (L25568)
|
| |
-
WBL 121S - Work-Based Learning II Sst
Class: 0 Lab: 0 Clinical: 0 Work: 10 Credits: 1
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (L25575)
|
| |
-
WBL 121T - Work-Based Learning II Ctc
Class: 0 Lab: 0 Clinical: 0 Work: 10 Credits: 1
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (L25591)
|
| |
-
WBL 121Y - Work-Based Learning II Baking
Class: 0 Lab: 0 Clinical: 0 Work: 10 Credits: 1
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (L26139)
|
| |
-
WBL 125 - Work-Based Learning Seminar II
Class: 1 Lab: 0 Clinical: 0 Credits: 1
Corequisites: Take One: WBL-121, WBL-122, WBL-123 or WBL-124
This course description may be written by the individual colleges. This course is designed to be a corequisite seminar to accompany Work-Based Learning 121. Topics include: examination and analysis of the organizational structure, career path, job descriptions, job breakdowns and management style. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (S23804)
|
| |
-
WBL 131 - Work-Based Learning III
Class: 0 Lab: 0 Clinical: 0 Work: 10 Credits: 1
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (S23805)
|
| |
-
WBL 131G - Work-Based Learning III L-G
Class: 0 Lab: 0 Clinical: 0 Work: 10 Credits: 1
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (L25571)
|
| |
-
WBL 131H - Work-Based Learning III H-M
Class: 0 Lab: 0 Clinical: 0 Work: 10 Credits: 1
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (L25625)
|
| |
-
WBL 131K - Work-Based Learning III Culina
Class: 0 Lab: 0 Clinical: 0 Work: 10 Credits: 1
This course provides a work-based learning experience with a college-approved employer in an area related to the student’s program of study. Emphasis is placed on integrating classroom learning with related work experience. Upon completion, students should be able to evaluate career selection, demonstrate employability skills, and satisfactorily perform work-related competencies. (L25586)
|
| |
-
WBL 215 - Work-Based Learning Seminar IV
Class: 1 Lab: 0 Clinical: 0 Credits: 1
Prerequisites: Take WBL-211, WBL-212, WBL-213 or WBL-214;
This course description may be written by the individual colleges. (S23817)
|
Web Technologies |
| |
-
WEB 179 - JAVA Web Programming
Class: 2 Lab: 3 Clinical: 0 Credits: 3
Prerequisites: None
Corequisites: None
This course introduces the development of dynamic, database-driven web applications using the JAVA programming languages. Topics include Object Oriented Programming JAVA Server Pages, servlets, database interactions, and form handling. Upon completion, students should be able to create and modify JAVA-based internet applications. (S21484)
|
Welding |
| |
-
WLD 262 - Inspection & Testing
Class: 2 Lab: 2 Clinical: 0 Credits: 3
Prerequisites: None
Corequisites: None
This course introduces destructive and non-destructive testing methods. Emphasis is placed on safety, types and methods of testing, and the use of testing equipment and materials. Upon completion, students should be able to understand and/or perform a variety of destructive and non-destructive testing processes. (S11961)
|
| |
Page: 1 <- Back 10 … 4
| 5
| 6
| 7
| 8
| 9
| 10
| 11
| 12
| 13
| 14
|
|
|
|
Print this Page