CFCC 2018-2019 Catalog & Student Handbook [ARCHIVED CATALOG]
Course Descriptions
|
|
Please Note:
Prerequisites: A course taken prior to another course.
- CFCC administers one placement test: NCDAP. Satisfactory scores on placement tests taken at other colleges (SAT, ACT, COMPASS) may be used to waive Reading, Writing and Mathematical prerequisites. See the Placement Test Advising Guide, for additional information or talk with a counselor.
- Receipt of transfer credit for ENG 111 or above will waive the Reading and/or Writing prerequisites for certain courses.
- Receipt of a curriculum math credit will waive the prerequisites for certain courses.
Corequisites: A course taken at the same time as another course or prior to the course to be taken.
Some courses in communications, humanities/fine arts, mathematics, natural science, or social/behavioral science may fulfill a general education requirement in one of the following programs: AA (Associate in Arts), AS (Associate in Science), AFA (Associate in Fine Arts), AGE (Associate in General Education), AAS (Associate in Applied Science), DIP (Diploma), or CER (Certificate). Please refer to the programs of study section of this catalog for courses that satisfy each program’s general education requirements.
Developmental Math: Effective 2014 Fall, as mandated by the System Office, developmental math has been broken up into eight modules agreed upon and approved by the state. Students who have taken previous developmental math courses should refer to this table to equate current developmental math courses.
MAT 060 = DMA 10 , DMA 20 , DMA 30
MAT 070 = MSC 210 , DMA 50
MAT 080 = DMA 60 , DMA 70 , DMA 80
Developmental English and Reading: Students who have taken previous developmental English and Reading courses should refer to this table to equate current developmental English and Reading courses.
ENG 075 = DRE 96
ENG 085 = DRE 97
ENG 095 = DRE 98
|
|
Other Courses |
|
-
AHR 110 - Intro to Refrigeration Class: 2 Lab: 6 Clinical: 0 Credits: 5
This course introduces the basic refrigeration process used in mechanical refrigeration and air conditioning systems. Topics include terminology, safety, and identification and function of components; refrigeration cycle; and tools and instrumentation used in mechanical refrigeration systems. Upon completion, students should be able to identify refrigeration systems and components, explain the refrigeration process, and use the tools and instrumentation of the trade. (S23419)
|
|
-
AHR 111 - HVACR Electricity Class: 2 Lab: 2 Clinical: 0 Credits: 3
Prerequisites: Take AHR-110
This course introduces electricity as it applies to HVACR equipment. Emphasis is placed on power sources, interaction of electrical components, wiring of simple circuits, and the use of electrical test equipment. Upon completion, students should be able to demonstrate good wiring practices and the ability to read simple wiring diagrams. (S23420)
|
|
-
AHR 112 - Heating Technology Class: 2 Lab: 4 Clinical: 0 Credits: 4
Prerequisites: Take AHR-110 This course covers the fundamentals of heating including oil, gas, and electric heating systems. Topics include safety, tools and instrumentation, system operating characteristics, installation techniques, efficiency testing, electrical power, and control systems. Upon completion, students should be able to explain the basic oil, gas, and electrical heating systems and describe the major components of a heating system. (S23421)
|
|
-
AHR 113 - Comfort Cooling Class: 2 Lab: 4 Clinical: 0 Credits: 4
Prerequisites: Take AHR-110 This course covers the installation procedures, system operations, and maintenance of residential and light commercial comfort cooling systems. Topics include terminology, component operation, and testing and repair of equipment used to control and produce assured comfort levels. Upon completion, students should be able to use psychrometrics, manufacturer specifications, and test instruments to determine proper system operation. ALL (S23422)
|
|
-
AHR 114 - Heat Pump Technology Class: 2 Lab: 4 Clinical: 0 Credits: 4
Prerequisites: Take One: AHR-110 or AHR-113 This course covers the principles of air source and water source heat pumps. Emphasis is placed on safety, modes of operation, defrost systems, refrigerant charging, and system performance. Upon completion, students should be able to understand and analyze system performance and perform routine service procedures. ALL (S23423)
|
|
-
AHR 115 - Refrigeration Systems Class: 1 Lab: 3 Clinical: 0 Credits: 2
Prerequisites: Take AHR-110 This course introduces refrigeration systems and applications. Topics include defrost methods, safety and operational control, refrigerant piping, refrigerant recovery and charging, and leak testing. Upon completion, students should be able to assist in installing and testing refrigeration systems and perform simple repairs. (S14137)
|
|
-
AHR 120 - HVACR Maintenance Class: 1 Lab: 3 Clinical: 0 Credits: 2
This course introduces the basic principles of industrial air conditioning and heating systems. Emphasis is placed on preventive maintenance procedures for heating and cooling equipment and related components. Upon completion, students should be able to perform routine preventive maintenance tasks, maintain records, and assist in routine equipment repairs. ALL (S13153)
|
|
-
AHR 130 - HVAC Controls Class: 2 Lab: 2 Clinical: 0 Credits: 3
Prerequisites: Take One: AHR-111, ELC-111, or ELC-112 This course covers the types of controls found in residential and commercial comfort systems. Topics include electrical and electronic controls, control schematics and diagrams, test instruments, and analysis and troubleshooting of electrical systems. Upon completion, students should be able to diagnose and repair common residential and commercial comfort system controls. ALL (S23273)
|
|
-
AHR 133 - HVAC Servicing Class: 2 Lab: 6 Clinical: 0 Credits: 4
Prerequisites: Take One: AHR-112 OR AHR-113 Corequisites: Take AHR-112, AHR-113
The course covers the maintenance and servicing of HVAC equipment. Topics include testing, adjusting, maintaining, and troubleshooting HVAC equipment and record keeping. Upon completion, students should be able to adjust, maintain, and service HVAC equipment. ALL (S13769)
|
|
-
AHR 140 - All-Weather Systems Class: 1 Lab: 3 Clinical: 0 Credits: 2
Prerequisites: Take One: AHR-112 or AHR-113 This course covers the principles of combination heating and cooling systems including gas-electric, all-electric, and oil-electric systems. Topics include PTAC’s and package and split-system units. Upon completion, students should be able to understand systems performance and perform routine maintenance procedures. ALL (S11450)
|
|
-
AHR 210 - Residential Building Code Class: 1 Lab: 2 Clinical: 0 Credits: 2
Prerequisites: Take AHR-110 This course covers the residential building codes that are applicable to the design and installation of HVAC systems. Topics include current residential codes as applied to HVAC design, service, and installation. Upon completion, students should be able to demonstrate the correct usage of residential building codes that apply to specific areas of the HVAC trade. (S10349)
|
|
-
AHR 211 - Residential System Design Class: 2 Lab: 2 Clinical: 0 Credits: 3
This course introduces the principles and concepts of conventional residential heating and cooling system design. Topics include heating and cooling load estimating, basic psychrometrics, equipment selection, duct system selection, and system design. Upon completion, students should be able to design a basic residential heating and cooling system. ALL (S23445)
|
|
|
|
|
|
-
ARC 111 - Intro to Arch Technology Class: 1 Lab: 6 Clinical: 0 Credits: 3
Prerequisites: Take One Set: Set 1: RED-080 DMA-010 DMA-020 DMA-030 Set 2: ENG-085 DMA-010 DMA-020 DMA-030 Set 3: RED-090 DMA-010 DMA-020 DMA-030 Set 4: ENG-095 DMA-010 DMA-020 DMA-030 Set 5: ENG-111 DMA-010 DMA-020 DMA-030 Set 6: DRE-097 DMA-010 DMA-020 DMA-030 This course introduces basic architectural drafting techniques, lettering, use of architectural and engineer scales, and sketching. Topics include orthographic, axonometric, and oblique drawing techniques using architectural plans, elevations, sections, and details; reprographic techniques; and other related topics. Upon completion, students should be able to prepare and print scaled drawings within minimum architectural standards.
(S11683)
|
|
-
ARC 112 - Constr Matls & Methods Class: 3 Lab: 2 Clinical: 0 Credits: 4
Prerequisites: Take One Set: Set 1: RED-080 DMA-010 DMA-020 DMA-030 Set 2: ENG-085 DMA-010 DMA-020 DMA-030 Set 3: RED-090 DMA-010 DMA-020 DMA-030 Set 4: ENG-095 DMA-010 DMA-020 DMA-030 Set 5: ENG-111 DMA-010 DMA-020 DMA-030 Set 6: DRE-097 DMA-010 DMA-020 DMA-030 This course introduces construction materials and methodologies. Topics include construction terminology, traditional and alternative materials and their properties, manufacturing processes, construction techniques, and other related topics. Upon completion, students should be able to detail construction assemblies and identify construction materials and properties.
(S23271)
|
|
-
ARC 113 - Residential Arch Tech Class: 1 Lab: 6 Clinical: 0 Credits: 3
Prerequisites: Take ARC-111, ARC-114 and ARC-114A Corequisites: Take ARC-112
This course covers intermediate residential working drawings. Topics include residential plans, elevations, sections, details, schedules, and other related topics. Upon completion, students should be able to prepare a set of residential working drawings that are within accepted architectural standards. (S11635)
|
|
-
ARC 114 - Architectural CAD Class: 1 Lab: 3 Clinical: 0 Credits: 2
Corequisites: Take ARC-114A
This course introduces basic architectural CAD techniques. Topics include basic commands and system hardware and software. Upon completion, students should be able to prepare and plot architectural drawings to scale within accepted architectural standards.
(S10248)
|
|
-
ARC 114A - Architectural CAD Lab Class: 0 Lab: 3 Clinical: 0 Credits: 1
Corequisites: Take ARC-114
This course provides a laboratory setting to enhance architectural CAD skills. Emphasis is placed on further development of commands and system operation. Upon completion, students should be able to prepare and plot scaled architectural drawings.
(S11284)
|
|
-
ARC 132 - Specifications & Contracts Class: 2 Lab: 0 Clinical: 0 Credits: 2
Prerequisites: Take ARC-112 and ARC-230 This course covers the development of written specifications and the implications of different contractual arrangements. Topics include specification development, contracts, bidding material research, and agency responsibilities. Upon completion, students should be able to write a specification section and demonstrate the ability to interpret contractual responsibilities.
(S12627)
|
|
-
ARC 211 - Light Constr Technology Class: 1 Lab: 6 Clinical: 0 Credits: 3
Prerequisites: Take ARC-111 and ARC-230 Corequisites: ARC-112
This course covers working drawings for light construction. Topics include plans, elevations, sections, and details; schedules; and other related topics. Upon completion, students should be able to prepare a set of working drawings which are within accepted architectural standards.
(S13934)
|
|
-
ARC 213 - Design Project Class: 2 Lab: 6 Clinical: 0 Credits: 4
Prerequisites: Take All: ARC-111, ARC-112, ARC-114, ARC-114A, ARC-211 and ARC-230 This course provides the opportunity to design and prepare a set of contract documents within an architectural setting. Topics include schematic design, design development, construction documents, and other related topics. Upon completion, students should be able to prepare a set of commercial contract documents.
(S10726)
|
|
-
ARC 214 - Architectural Statics Class: 3 Lab: 0 Clinical: 0 Credits: 3
Prerequisites: Take All: ARC-111, ARC-112, and MAT-121 This course covers the concepts of elementary statics as applied to architecture. Topics include forces, resultants, and types of force system; equations of equilibrium; reactions of simple architectural structures; internal forces in architectural roof trusses; frames and beams; centroids and moments of inertia as applied to architecture. Upon completion, students should be able to solve problems which require the ability to analyze systems of forces in static equilibrium as applied to architectural forms.
(S10740)
|
|
-
ARC 220 - Adv Architect CAD Class: 1 Lab: 3 Clinical: 0 Credits: 2
Prerequisites: Take ARC-114 Take ARC-114A This course provides file management, productivity, and CAD customization skills. Emphasis is placed on developing advanced proficiency techniques. Upon completion, students should be able to create prototype drawings and symbol libraries, compose sheets with multiple details, and use advanced drawing and editing commands. (S13375)
|
|
-
ARC 221 - Architectural 3-D CAD Class: 1 Lab: 4 Clinical: 0 Credits: 3
Prerequisites: Take ARC-114 Take ARC-220 This course introduces architectural three-dimensional CAD applications. Topics include three-dimensional drawing, coordinate systems, viewing, rendering, modeling, and output options. Upon completion, students should be able to prepare architectural three-dimensional drawings and renderings.
(S13466)
|
|
-
ARC 225 - Architectural BIM I Class: 1 Lab: 3 Clinical: 0 Credits: 2
Corequisites: Take ARC-225A
This course is an introduction to the fundamentals of Building Information Modeling (BIM) as a construction documentation system. Topics include basic parametric modeling, creating new types and families of components, and using 3D models to create design drawings. Upon competition, students should be able to use BIM software to create, edit, and print rudimentary architectural 3D computer models. (S23627)
|
|
-
ARC 225A - Architectural BIM I Lab Class: 0 Lab: 3 Clinical: 0 Credits: 1
Corequisites: Take ARC-225
This course provides a laboratory setting to enhance architectural BIM skills. Emphasis is placed on further development of basic parametric modeling, creating new types and families of components. Upon competition, students should be able to use BIM software to create, edit, and print rudimentary architectural 3D computer models. (S23629)
|
|
-
ARC 230 - Environmental Systems Class: 3 Lab: 3 Clinical: 0 Credits: 4
Prerequisites: Take One Set: Set 1: ARC-111 and MAT-121 Set 2: ARC-111 and MAT-171 This course introduces plumbing, mechanical (HVAC), and electrical systems for the architectural environment. Topics include basic plumbing, mechanical, and electrical systems for residential and/or commercial buildings with an introduction to selected code requirements. Upon completion, students should be able to develop schematic drawings for plumbing, mechanical, and electrical systems and perform related calculations. (S23949)
|
|
-
ARC 231 - Arch Presentations Class: 2 Lab: 4 Clinical: 0 Credits: 4
Prerequisites: Take ARC-111 This course introduces architectural presentation techniques. Topics include perspective drawing, shadow projection, texturization, rendered plans, elevations, and other related topics. Upon completion, students should be able to present ideas graphically and do rendered presentation drawings.
(S13888)
|
|
-
ARC 235 - Architectural Portfolio Class: 2 Lab: 3 Clinical: 0 Credits: 3
Prerequisites: Take ARC-113 ARC-231 This course covers the methodology for the creation of an architectural portfolio. Topics include preparation of marketing materials and a presentation strategy using conventional and/or digital design media. Upon completion, students should be able to produce an architectural portfolio of selected projects.
(S13879)
|
|
-
ASL 111 - Elementary ASL I Class: 3 Lab: 0 Clinical: 0 Credits: 3
Corequisites: Take ASL-181
This course introduces the fundamental elements of American Sign Language within a cultural context. Emphasis is placed on the development of basic expressive and receptive skills. Upon completion, students will be able to comprehend and respond with grammatical accuracy to expressive American Sign Language and demonstrate cultural awareness. (S11976)
This is a college transfer course. Check with your senior institution to ensure the course will be appropriate for your program at that institution. |
|
-
ASL 112 - Elementary ASL II Class: 3 Lab: 0 Clinical: 0 Credits: 3
Prerequisites: Take ASL-111; minimum grade C Corequisites: Take ASL-182
This course is a continuation of ASL 111 focusing on the fundamental elements of American Sign Language in a cultural context. Emphasis is placed on the progressive development of expressive and receptive skills. Upon completion, the students should be able to comprehend and respond with increasing accuracy to expressive American Sign Language and demonstrate cultural awareness. (S12047)
This is a college transfer course. Check with your senior institution to ensure the course will be appropriate for your program at that institution. |
|
-
ASL 181 - ASL Lab 1 Class: 0 Lab: 2 Clinical: 0 Credits: 1
Prerequisites: Take ASL-111 This course provides an opportunity to enhance acquisition of the fundamental elements of American Sign Language. Emphasis is placed on the progressive development of basic expressive and receptive skills through the use of supplementary learning media and materials. Upon completion, students should be able to comprehend and respond with grammatical accuracy to expressive American Sign Language and demonstrate cultural awareness. (S20855)
This is a college transfer course. Check with your senior institution to ensure the course will be appropriate for your program at that institution. |
|
-
ASL 182 - ASL Lab 2 Class: 0 Lab: 2 Clinical: 0 Credits: 1
Prerequisites: Take ASL-181; minimum grade C Corequisites: Take ASL-112
This course provides an opportunity to enhance acquisition of the fundamental elements of American Sign Language. Emphasis is placed on the progressive development of basic expressive and receptive skills through the use of supplementary learning media and materials. Upon completion, students should be able to comprehend and respond with increasing proficiency to expressive American Sign Language and demonstrate cultural awareness. (S20856)
This is a college transfer course. Check with your senior institution to ensure the course will be appropriate for your program at that institution. |
|
-
ASL 211 - Intermediate ASL I Class: 3 Lab: 0 Clinical: 0 Credits: 3
Prerequisites: Take ASL-112; minimum grade C Corequisites: Take ASL-281
This course provides a review and expansion of the essential skills of American Sign Language. Emphasis is placed on the progressive development of expressive and receptive skills, study of authentic and representative literacy and cultural texts. Upon completion, students should be able to communicate effectively, accurately, and creatively using American Sign Language about the past, present, and future. (S20054)
This is a college transfer course. Check with your senior institution to ensure the course will be appropriate for your program at that institution. |
|
|
|
|
|
|
|
-
ASL 281 - ASL Lab 3 Class: 0 Lab: 2 Clinical: 0 Credits: 1
Prerequisites: Take ASL-182; minimum grade C Corequisites: Take ASL-211
This course provides an opportunity to enhance the review and expansion of the essential skills of American Sign Language. Emphasis is placed on the progressive development of expressive and receptive skills through the study of authentic and representative literary and cultural texts through the use of various supplementary learning media and materials. Upon completion, students should be able to communicate effectively, accurately, and creatively about the past, present, and future. (S20857)
This is a college transfer course. Check with your senior institution to ensure the course will be appropriate for your program at that institution. |
|
-
ATR 112 - Intro to Automation Class: 2 Lab: 3 Clinical: 0 Credits: 3
Prerequisites: Take One Set: Set 1: RED-090 DMA-010 DMA-020 DMA-030 DMA-040 DMA-050 Set 2: ENG-095 DMA-010 DMA-020 DMA-030 DMA-040 DMA-050 Set 3: ENG-111 DMA-010 DMA-020 DMA-030 DMA-040 DMA-050 Set 4: DRE-098 DMA-010 DMA-020 DMA-030 DMA-040 DMA-050 This course introduces the basic principles of automated systems and describes the tasks that technicians perform on the job. Topics include the history, development, and current applications of robots and automated systems including their configuration, operation, components, and controls. Upon completion, students should be able to understand the basic concepts of automation and robotic systems. (S23467)
|
|
-
AUB 111 - Painting & Refinishing I Class: 2 Lab: 6 Clinical: 0 Credits: 4
This course introduces the proper procedures for using automotive refinishing equipment and materials in surface preparation and application. Topics include federal, state, and local regulations, personal safety, refinishing equipment and materials, surface preparation, masking, application techniques, and other related topics. Upon completion, students should be able to identify and use proper equipment and materials in refinishing following accepted industry standards. (S10171)
|
|
|
|
|
|
-
AUB 121 - Non-Structural Damage I Class: 1 Lab: 4 Clinical: 0 Credits: 3
This course introduces safety, tools, and the basic fundamentals of body repair. Topics include shop safety, damage analysis, tools and equipment, repair techniques, materials selection, materials usage, and other related topics. Upon completion, students should be able to identify and repair minor direct and indirect damage including removal/repairing/replacing of body panels to accepted standards. (S12230)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-
AUC 114 - Custom Fiberglass Skills Class: 2 Lab: 4 Clinical: 0 Credits: 4
This course will provide instruction in non-metallic customizing and repair techniques. Emphasis will be placed on diagnosis and repair of cracks, proper use of bonding agents, fiberglass body parts removal/replacement, and custom fabrication techniques using fiberglass materials. Upon completion, students should be able to identify types of fiberglass and demonstrate the ability to properly prepare, apply, and finish fiberglass components. (S21526)
|
|
-
AUC 115 - Glass Customizing Methods Class: 2 Lab: 4 Clinical: 0 Credits: 4
This course will provide instruction on window removal/replacement, window tinting, and custom glass design etching techniques. Emphasis will be placed on proper removal/replacement, window tinting, laws concerning window tinting, and customizing techniques used to etch designs in auto glasses. Upon completion, students should be able to interpret the laws concerning window tinting, perform removal/replacement/tinting, and use customizing techniques to etch designs on auto glass. (S21527)
|
|
-
AUC 117 - Custom Airbrushing Class: 2 Lab: 6 Clinical: 0 Credits: 4
This course covers custom airbrushing techniques, finish application, and equipment selection. Emphasis is placed on the design and application of custom airbrushing techniques and proper equipment maintenance. Upon completion, students should be able to design and apply custom air brush graphics using a variety of techniques. (S22945)
|
|
|
|
|
|
|
|
-
AUT 141 - Suspension & Steering Sys Class: 2 Lab: 3 Clinical: 0 Credits: 3
Prerequisites: Take TRN-110 This course covers principles of operation, types, and diagnosis/repair of suspension and steering systems to include steering geometry. Topics include manual and power steering systems and standard and electronically controlled suspension and steering systems. Upon completion, students should be able to service and repair steering and suspension components, check and adjust alignment angles, repair tires, and balance wheels.
(S21690)
|
|
|
|
-
AUT 151 - Brake Systems Class: 2 Lab: 3 Clinical: 0 Credits: 3
Prerequisites: Take one: ENG-085 RED-080 ENG-095 RED-090 DRE-097 or ENG-111 Corequisites: Take AUT-151A
This course covers principles of operation and types, diagnosis, service, and repair of brake systems. Topics include drum and disc brakes involving hydraulic, vacuum boost, hydra-boost, electrically powered boost, and anti-lock and parking brake systems. Upon completion, students should be able to diagnose, service, and repair various automotive braking systems.
(S21692)
|
|
-
AUT 151A - Brakes Systems Lab Class: 0 Lab: 3 Clinical: 0 Credits: 1
Prerequisites: Take one: ENG-085 RED-080 ENG-095 RED-090 DRE-097 or ENG-111 Corequisites: Take AUT-151
This course is an optional lab to be used as an alternative to co-op placement in meeting the NATEF standards for total hours. Topics include drum and disc brakes involving hydraulic, vacuum-boost, hydra-boost, electrically powered boost, and anti-lock, parking brake systems and emerging brake systems technologies. Upon completion, students should be able to diagnose, service, and repair various automotive braking systems.
(S21693)
|
|
-
AUT 163 - Adv Auto Electricity Class: 2 Lab: 3 Clinical: 0 Credits: 3
Prerequisites: Take TRN-120 This course covers electronic theory, wiring diagrams, test equipment, and diagnosis, repair, and replacement of electronics, lighting, gauges, horn, wiper, accessories, and body modules. Topics include networking and module communication, circuit construction, wiring diagrams, circuit testing, and troubleshooting. Upon completion, students should be able to properly use wiring diagrams, diagnose, test, and repair wiring, lighting, gauges, accessories, modules, and electronic concerns.
(S23604)
|
|
-
AUT 163A - Adv Auto Electricity Lab Class: 0 Lab: 3 Clinical: 0 Credits: 1
Prerequisites: Take TRN-120 Corequisites: Take AUT-163
This course is an optional lab to be used as an alternative to co-op placement in meeting the NATEF standards for total hours. Topics include networking and module communication, circuit construction, wiring diagrams, circuit testing, troubleshooting and emerging electrical/electronic systems technologies. Upon completion, students should be able to properly use wiring diagrams, diagnose, test, and repair wiring, lighting, gauges, accessories, modules, and electronic concerns.
(S21699)
|
|
|
|
|
|
|
|
-
AUT 213 - Automotive Servicing 2 Class: 1 Lab: 3 Clinical: 0 Credits: 2
This course is a lab used as an alternative to co-op placement. Emphasis is placed on shop operations, troubleshooting, testing, adjusting, repairing, and replacing components using appropriate test equipment and service information. Upon completion, students should be able to perform a variety of automotive repairs using proper service procedures and to operate appropriate equipment.
(S21706)
|
|
|
|
|
|
|
|
|
|
|
|
-
BAF 110 - Principles of Banking Class: 3 Lab: 0 Clinical: 0 Credits: 3
This course covers the fundamentals of bank functions in a descriptive fashion. Topics include banks and the monetary system, the relationship of banks to depositors, the payment functions, bank loans and accounting, regulations, and examinations. Upon completion, students should be able to demonstrate an understanding of the business of banking from a broad perspective. (S24131)
|
|
-
BAF 111 - Teller Training Class: 3 Lab: 0 Clinical: 0 Credits: 3
This course provides an overview of banking teller operations, bank security, and customer relations in preparation for work as a bank teller. Topics include bank profitability, cash and cash handling, checks and other transactions, balancing and setting, and security threats and their detection. Upon completion, students should be able to discuss the components of teller performance and perform effectively as a teller after minimal on-the-job training. (S10163)
|
|
-
BAF 143 - Financial Planning Class: 3 Lab: 0 Clinical: 0 Credits: 3
This course covers the perspectives, principles, and practices of financial planning. Topics include investment, retirement, tax, and estate planning. Upon completion, students should be able to understand the process that looks at a customer’s financial picture and recommend strategies to achieve the customer’s objectives. (S13055)
|
|
|
|
|
|
-
BAS 120 - Intro to Analytics Class: 2 Lab: 3 Clinical: 0 Credits: 3
This course introduces basic concepts and applications of analytics. Topics include an overview of the analytical process and the role of the analyst, applied descriptive statistics, and exploratory data analysis. Upon completion, students should be able to demonstrate a basic understanding of analytics for decision-making in business. (S24318)
|
|
-
BAS 121 - Data Visualization Class: 2 Lab: 3 Clinical: 0 Credits: 3
Prerequisites: Take BAS-120 Restrictions: coreq or rule for BAS-121_2012FA
This course introduces key concepts in data visualization and reporting. Topics include concepts and methods used in graphical representation of data, exploration and reporting of data, and basic linear regression methods. Upon completion, students should be able to effectively use graphical tools to communicate insights about data. (S24319)
|
|
-
BAS 150 - Intro to Analytical Program. Class: 2 Lab: 3 Clinical: 0 Credits: 3
This course introduces statistical software for analytics. Topics include utilization of analytical and statistical software packages for data management, data visualization, and exploratory data analysis. Upon completion, students should be able to use statistical programming tools to conduct descriptive analytics. (S24320)
|
|
-
BAS 220 - Appl. Analytical Program. Class: 2 Lab: 3 Clinical: 0 Credits: 3
Prerequisites: Take BAS-150 This course covers applications of statistical software for data management and reporting. Topics include data management, data preprocessing, and modeling including linear and logistic regression analysis using programming tools. Upon completion, students should be able to process data and generate reports that support business decision-making. (S24321)
|
|
-
BAS 221 - Intro to Predictive Analytics Class: 2 Lab: 3 Clinical: 0 Credits: 3
Prerequisites: Take All: BAS-121 and BAS-220 This course introduces foundations of predictive analytics. Topics include basic predictive modeling methods for both classification and regression tasks. Upon completion, students should be able to build and validate predictive models. (S24322)
|
|
-
BAS 230 - Applied Predictive Modeling Class: 2 Lab: 3 Clinical: 0 Credits: 3
Prerequisites: Take BAS-221 This course covers advanced applications of predictive models. Topics include the advanced use of classification and regression models in real-world scenarios. Upon completion, students should be able to utilize their knowledge and skills in predictive analytics to independently guide decision makers. (S24323)
|
|
-
BAS 240 - Data Structures for Analytics Class: 2 Lab: 3 Clinical: 0 Credits: 3
Prerequisites: Take All: BAS-121 and BAS-220 This course is designed to enhance student proficiency in data management skills for analytics applications. Topics include techniques and methods for identification, extraction, and preparation of data for processing with analytical software. Upon completion, students should be able to demonstrate the skills necessary to effectively organize and combine different data sources for analytic applications. (S24330)
|
|
-
BAS 270 - Adv Analytical Tools & Methods Class: 2 Lab: 3 Clinical: 0 Credits: 3
Prerequisites: Take All: BAS-221 and BAS-240 This course covers the planning and execution of an analytics project that integrates the analytical knowledge and skills acquired through prior coursework. Students will define and carry out an analytics project from inception to final reporting. Upon completion, students should be able to demonstrate their ability to apply analytic methods and best practices in a simulated business setting. (S24333)
|
|
-
BMS 117 - Marine Spray Finishing Class: 1 Lab: 2 Clinical: 0 Credits: 2
This course covers the fundamental techniques used in the preparation and application of marine finishes, using modern coatings and spray equipment common to the marine manufacturing and service industry. Emphasis is placed on safety, product data sheets, mixing ratios, proper spray technique, troubleshooting finishes and equipment. Upon completion, students should be able to correctly operate tools to efficiently prepare surfaces, apply fairing compounds, primers and finish coats to industry standards. (S21973)
|
|
-
BUS 110 - Introduction to Business Class: 3 Lab: 0 Clinical: 0 Credits: 3
Prerequisites: Take DRE-097; This course provides a survey of the business world. Topics include the basic principles and practices of contemporary business. Upon completion, students should be able to demonstrate an understanding of business concepts as a foundation for studying other business subjects. (S24149)
This is a college transfer course. Check with your senior institution to ensure the course will be appropriate for your program at that institution. |
|
-
BUS 115 - Business Law I Class: 3 Lab: 0 Clinical: 0 Credits: 3
Prerequisites: Take one: ENG-095 RED-090 DRE-098 or ENG-111 This course introduces the student to the legal and ethical framework of business. Contracts, negotiable instruments, the law of sales, torts, crimes, constitutional law, the Uniform Commercial Code, and the court systems are examined. Upon completion the student should be able to identify legal and ethical issues that arise in business decisions and the laws that apply to them. (S24153)
This is a college transfer course. Check with your senior institution to ensure the course will be appropriate for your program at that institution. |
|
-
BUS 121 - Business Math Class: 2 Lab: 2 Clinical: 0 Credits: 3
Prerequisites: Take DMA-010 and DMA-020 and DMA-030 This course covers fundamental mathematical operations and their application to business problems. Topics include payroll, pricing, interest and discount, commission, taxes, and other pertinent uses of mathematics in the field of business. Upon completion, students should be able to apply mathematical concepts to business. (S14289)
|
|
-
BUS 125 - Personal Finance Class: 3 Lab: 0 Clinical: 0 Credits: 3
Prerequisites: Take DMA-010 and DMA-020 and DMA-030 This course provides a study of individual and family financial decisions. Emphasis is placed on building useful skills in buying, managing finances, increasing resources, and coping with current economic conditions. Upon completion, students should be able to develop a personal financial plan. (S14300)
|
|
|
|
-
BUS 137 - Principles of Management Class: 3 Lab: 0 Clinical: 0 Credits: 3
Prerequisites: Take one: ENG-095 RED-090 DRE-098 or ENG-111 This course is designed to be an overview of the major functions of management. Emphasis is placed on planning, organizing, controlling, directing, and communicating. Upon completion, students should be able to work as contributing members of a team utilizing these functions of management. (S24151)
This is a college transfer course. Check with your senior institution to ensure the course will be appropriate for your program at that institution. |
|
-
BUS 225 - Business Finance Class: 2 Lab: 2 Clinical: 0 Credits: 3
Prerequisites: Take ACC-120 Take BUS-121 and DMA-010 and DMA-020 and DMA-030 This course provides an overview of business financial management. Emphasis is placed on financial statement analysis, time value of money, management of cash flow, risk and return, and sources of financing. Upon completion, students should be able to interpret and apply the principles of financial management. (S13686)
|
|
-
BUS 230 - Small Business Management Class: 3 Lab: 0 Clinical: 0 Credits: 3
Prerequisites: Take one: ENG-095 RED-090 DRE-098 or ENG-111 This course introduces the challenges of entrepreneurship including the startup and operation of a small business. Topics include market research techniques, feasibility studies, site analysis, financing alternatives, and managerial decision making. Upon completion, students should be able to develop a small business plan. (S11937)
|
|
-
BUS 239 - Bus Applications Seminar Class: 1 Lab: 2 Clinical: 0 Credits: 2
Prerequisites: Take One Set: Set 1: ACC-120, BUS-115, BUS-137, MKT-120, and ECO-151 Set 2: ACC-120, BUS-115, BUS-137, MKT-120, and ECO-251 Set 3: ACC-120, BUS-115, BUS-137, MKT-120, and ECO-252 This course is designed as a capstone course for Business Administration majors. Emphasis is placed on decision making in the areas of management, marketing, production, purchasing, and finance. Upon completion, students should be able to apply the techniques, processes, and vital professional skills needed in the work place. (S12076)
|
|
-
BUS 240 - Business Ethics Class: 3 Lab: 0 Clinical: 0 Credits: 3
This course introduces contemporary and controversial ethical issues that face the business community. Topics include moral reasoning, moral dilemmas, law and morality, equity, justice and fairness, ethical standards, and moral development. Upon completion, students should be able to demonstrate an understanding of their moral responsibilities and obligations as members of the workforce and society. (S14002)
|
|
-
BUS 253 - Leadership and Mgt Skills Class: 3 Lab: 0 Clinical: 0 Credits: 3
This course includes a study of the qualities, behaviors, and personal styles exhibited by leaders. Emphasis is placed on coaching, counseling, team building, and employee involvement. Upon completion, students should be able to identify and exhibit the behaviors needed for organizational effectiveness. (S13328)
|
|
-
BUS 260 - Business Communication Class: 3 Lab: 0 Clinical: 0 Credits: 3
Prerequisites: Take One: ENG-110 or ENG-111 Take One: CIS-110 or CIS-111 This course is designed to develop skills in writing business communications. Emphasis is placed on business reports, correspondence, and professional presentations. Upon completion, students should be able to communicate effectively in the work place. (S23621)
|
|
-
BUS 270 - Professional Development Class: 3 Lab: 0 Clinical: 0 Credits: 3
This course provides basic knowledge of self-improvement techniques as related to success in the professional world. Topics include positive human relations, job-seeking skills, and projecting positive self-image. Upon completion, students should be able to demonstrate competent personal and professional skills necessary to get and keep a job. (S11540)
|
|
-
BUS 280 - REAL Small Business Class: 4 Lab: 0 Clinical: 0 Credits: 4
This course introduces hands-on techniques and procedures for planning and opening a small business, including the personal qualities needed for entrepreneurship. Emphasis is placed on market research, finance, time management, and day-to-day activities of owning/operating a small business. Upon completion, students should be able to write and implement a viable business plan and seek funding. (S14264)
|
|
Page: 1
| 2
| 3
| 4
| 5
| 6
| 7
| 8
| 9
| 10
| 11
… Forward 10 -> 14 |
|
|
|